If any question, contact us https://shaks.channel.io/
[ Index ]
ย
Compatible Device & Service
- S1+ is supporting android, Windows PC, Notebook, Nintendo Switch, Android Phone. Please select mode matching your device. And check your service to play !
ย
Button layout & Status indication by LED
- Please check the button/key name and LED indication to see the status of your gamepad.
ย
Mode selection according to your device
When the power is on, even if you change the mode, it can not be changed. Please follow the each steps for the correct mode setting.
- Power off the device,
- Select gamepad mode for your device in the table.
- Press two hot-keys simultaneously until booting. Press โHot Keysโ for more than 3 seconds
ย
Connect your device
Once you correctly choose the mode, power on
- Power on: Press 'Power Button' for 3 seconds. When the gamepad is turned on by pressing the 'Power button', the default is Android mode. Change mode according to the above table. And follow step 2 based on the device you wish to connect. After the initial setup is complete, the gamepad will remember your device to connect automatically.
Connecting with an Windows PC/Nintendo Switch
- Plug USB-dongle into your PC.
- Press [Power+ LB] button for 3 seconds.
- When โPairingโ is successful: LED signals #1,2 light up.
- Window tip) Recommended to use Windows 10 or later. If you are using Windows 7, please install โXbox 360 driverโ driver first on your PC that you can find on our website.
- Nintendo Switch tip) When using Nintendo Switch, check if โSetting > Controller and Sensor > Pro controller wired communication item is ONโ.
- Nintendo Switch tip2) The message โRegisteredโ appears, connection with Nintendo Switch is completed.
Connecting with a Wired Connection
If your PC do not support Bluetooth, please use โWired Modeโ.
- Firstly, turn off the gamepad and connect with USB cable. Then, connect USB cable to PC USB port while pressing 'RB button'.
- When the message "XBOX 360 For Windows" appears on the PC, the connection is completed!
- When โPairingโ is successful: LED signal #1or #3 lights up.
Note) Recommended to use Windows 10 or later. If you are using Windows 7, please install โXbox 360 driverโ driver first on your PC that you can find on our website.
- Nintendo Switch tip) The message โRegisteredโ appears, connection with Nintendo Switch is completed. The LEDs follow Switchโs style.
Connecting Android phone/tablet and TV box by USB-dongle
- -1. Phone/Tablet Connecting: Plug into smartphone after connecting USB cable and OTG-gender.
Notice: Since OTG-gender is different for each mobile model, please purchase and install gender suitable for the model.
-2. TV Box Connecting: Plug USB-dongle into the TV set-top boxโs USB port.
- Press [Power + LB] button for 3 seconds.
- When โPairingโ is successful: LED signals #1 #2 light up.
Connecting Android phone/tablet and TV box by Bluetooth
Console boxes such as Xbox, Playstation, Nintendo, etc. cannot be connected.
- Press [Power + X] button for 3 seconds.
- If 3rd LED blinks, select & connect โSHAKS S1+โ on BT device list in your device.
- When โPairingโ is successful: LED signal #3 lights up.
Playing on Mapping Mode (for Android only)
Download ShootingPlus V3 App. Windows is not supported. For more details, please visit www.en.shaksgame.com
- Press [Power + A] button for 3 seconds.
- If 1st LED blinks, select and connect โSHAKS S1+โ on BT device list in your device.
- When pairing is successful: LED signal #1 lights up.
- Now you are ready to play games with mapped keys on your device! Only when you are in the mapping mode you can use touch keys as gamepad controllers that you set up.
Reset & Initializing to recover setup process
If any issue during setup, please reset gamepad and your device as below and try again the step. SHAKS works like a 4 different gamepad, so, connection might be confused across those 4 modes.
- Booting your device again to confirm all cached log deleted or waiting for a while (3-5 seconds), it will automatically delete.
Four the information,
- Reset key on gamepad is powered off by force in any emergency case. Profile stored is not deleted.
- The last paired profle will be tried to re-connect. If fail, next one is being tried in a sequerce.
- โCached log dataโ can be cleared by OS by 2-5 minutes automatically. You can wait this auto clearing process.
when using Nintendo Switch
โ The S1+ LED display is the same as LED display on Switch only when wired connection.
โก The following functions cannot be used, please be aware.
- Capture button
- Wake up with HOME button
- Gyroscope sensor
- Exclusive games for Joy-Con is not supported
- HD vibration X (only maximum output supported)
โข Connection in Handheld mode (Tabletop mode)Use USB-OTG gender (C type). But, in this case, use it in a flat position or use a stand so that it does not touch floor.
ย
Compatible Gamelist Information
Please visit our page Compatible Game Library for searching relative information.
ย